Citations Report - Fashion Technology & Textile Engineering Journal

Articles published in Journal of Fashion Technology & Textile Engineering have been cited by esteemed scholars and scientists all around the world. Journal of Fashion Technology & Textile Engineering has got h-index 9, which means every article in Journal of Fashion Technology & Textile Engineering has got 9 average citations.

Following are the list of articles that have cited the articles published in Journal of Fashion Technology & Textile Engineering.

	2021	2020	2019	2018	2017
Year wise published articles	61	13	8	43	31
Year wise citations received	74	52	38	40	17

Journal total citations count	354
Journal Impact Factor	1.25
Journal 5 years Impact Factor	1.66
Journal CiteScore	1.89
Journal h-index	9
Journal h-index since 2017	9

Sarkar K, Das D, Chaki TK, Chattopadhyay S (2017) Macro-structured carbon clusters for developing waterproof, breathable conductive cotton fabric. Carbon 116: 1-4

Mahltig B, Zhang J, Wu L, Darko D, Wendt M, et al. (2016) Effect pigments for textile coating: a review of the broad range of advantageous functionalization. Journal of Coatings Technology and Research 14: 35-55

Dabrowska, A. K. (2016). The impact of structural solutions used in clothing protecting against cold on its thermal insulation. International Journal of Clothing Science and Technology.

Fournet, D., & Havenith, G. (2017). Assessment of sport garments using infrared thermography. In Application of Infrared Thermography in Sports Science (pp. 159-183). Springer, Cham.

Teyeme, Y., Malengier, B., Tesfaye, T., & Van Langenhove, L. (2020). A Fabric-Based Textile Stretch Sensor for Optimized Measurement of Strain in Clothing. Sensors, 20(24), 7323.

Abtew, M. A., Boussu, F., Bruniaux, P., Loghin, C., & Cristian, I. (2019). Ballistic impact mechanismsa review on textiles and fibre-reinforced composites impact responses. Composite structures, 223, 110966.

Kuhlmann J C, de Moor H, Driesser M, Bottenberg E, Spee C I M A, & Brinks G J (2018) Development of a universal solar energy harvesting system suited for textile integration including flexible energy storage. J Fash Technol Text Eng.

GÜRCÜM B, BÖRKLÜ H, SEZER H, & EREN O (2018) Implementing 3D printed structures as the newest textile form. J Fashion Technol Textile Eng S4: 019 2-7.

Bangari, N., Singh, V. K., & Sharma, V. K. (2020). Experimental investigation of thin-film solar cells as a wearable power source. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-21.

Satharasinghe, A., Hughes-Riley, T., & Dias, T. (2020). A Review of Solar Energy Harvesting Electronic Textiles. Sensors, 20(20), 5938.

Fang, S., Wang, R., Ni, H., Liu, H., & Liu, L. (2020). A review of flexible electric heating element and electric heating garments. Journal of Industrial Textiles, 1528083720968278.

Kara, S., Yesilpnar, S., & Arslan, M. (2021). A Survey and Design Study of a Protective Cycling Top Wear. Fibres Text. East. Eur, 28, 31-45.

Anam, W., Akhtar, K. S., Ahmad, F., Rasheed, A., Mohsin, M., Azam, F., ... & Ahmad, S. (2021). Effect of silicone based softener on fabric handle properties made by ring, rotor and MVS yarns. Pigment & Resin Technology.

Al Shaya, S., & Tashkndi, S. (2021). The effect of silver treated fabrics in achieving some clothing comfort characteristics for diabetic female patients, International Design Journal, Vol. 11 No. 2,(March 2021) pp 257-264

Rashid, M. M., Simoni, B., & TomÅ¡i, B. (2020). Recent advances in TiO2-functionalized textile surfaces. Surfaces and Interfaces, 100890.

Mahltig, B., Leisegang, T., Jakubik, M., & Haufe, H. (2021). Hybrid sol-gel materials for realization of radiation protective coatingsa review with emphasis on UV protective materials. Journal of Sol-Gel Science and Technology, 1-12.

Meyer, P., Boblenz, J., Sennewald, C., Vorhof, M., Hühne, C., Cherif, C., & Sinapius, M. (2019). Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications. Aerospace, 6(11), 116.

Vorhof, M., Sennewald, C., Schegner, P., Meyer, P., Hühne, C., Cherif, C., & Sinapius, M. (2021). Thermoplastic Composites for Integrally Woven Pressure Actuated Cellular Structures: Design Approach and Material Investigation. Polymers, 13(18), 3128.

Ankhili, A., Tao, X., Cochrane, C., Koncar, V., Coulon, D., & Tarlet, J. M. (2019). Ambulatory evaluation of ECG signals obtained using washable textile-based electrodes made with chemically modified PEDOT: PSS. Sensors, 19(2), 416.

Ankhili, A., Zaman, S. U., Tao, X., Cochrane, C., Koncar, V., & Coulon, D. (2019). How to Connect Conductive Flexible Textile Tracks to Skin Electrocardiography Electrodes and Protect Them Against Washing. IEEE Sensors Journal, 19(24), 11995-12002.

Maji, S., & Burke, M. J. (2019). Establishing the input impedance requirements of ECG recording amplifiers. IEEE Transactions on Instrumentation and Measurement, 69(3), 825-835.

Goncu-Berk, G., & Tuna, B. G. (2021). The Effect of Sleeve Pattern and Fit on E-Textile Electromyography (EMG) Electrode Performance in Smart Clothing Design. Sensors, 21(16), 5621.

Yun, I., Jeung, J., Lim, H., Kang, J., Lee, S., Park, S., ... & Chung, Y. (2021). Stable Bioelectric Signal Acquisition Using an Enlarged Surface-Area Flexible Skin Electrode. ACS Applied Electronic Materials, 3(4), 1842-1851.

Mert, A. T. E., GÃRARDA, A., & kenan ÃEVEN, E. (2019). Investigation of Seam Performance of Chain Stitch and Lockstitch Used in Denim Trousers. Tekstil ve MÃhendis, 26(115), 263-270.

MEZARCIÖZ, S., O?ULATA, R. T., & Nergis, A. (2020). Investigation of elasticity and growth properties of denim fabrics woven with core and siro spun yarn. Textile and Apparel, 30(4), 312-320.

Liu, Z., He, Q., Zou, F., Ding, Y., & Xu, B. (2019). Apparel ease distribution analysis using three-dimensional motion capture. Textile Research Journal, 89(19-20), 4323-4335.

Jolly, K., Krzywinski, S., Rao, P. V. M., & Gupta, D. (2019). Kinematic modeling of a motorcycle rider for design of functional clothing. International Journal of Clothing Science and Technology.

Vasile, S., Cools, J., De Raeve, A., Malengier, B., & Deruyck, F. (2021). Effect of rowing posture on body measurements and skinsportswear interface pressure and implications on garment fit. Journal of Industrial Textiles, 51(2), 206-224.

Dabolina, I., Lapkovska, E., & Vilumsone, A. (2019). Dynamic Anthropometry for Investigation of Body Movement Comfort in Protective Jacket. In Functional Textiles and Clothing (pp. 241-259). Springer, Singapore.

Abu-Rous, M., Dabolina, I., & Lapkovska, E. (2018, December). Fabric physical properties and clothing comfort. In IOP Conference Series: Materials Science and Engineering (Vol. 459, No. 1, p. 012028). IOP Publishing.

Musa, A. B. H., Malengier, B., Vasile, S., & Van Langenhove, L. (2019). A comprehensive approach for human hand evaluation of split or large set of fabrics. Textile Research Journal, 89(19-20), 4239-4252.

Abu-Rous, M., Dabolina, I., & Lapkovska, E. (2018, December). Fabric physical properties and clothing comfort. In IOP Conference Series: Materials Science and Engineering (Vol. 459, No. 1, p. 012028). IOP Publishing.

Blaisdell, M. G. S., & Yun, C. (2021). The effect of repeated laundering on the softness and smoothness of terry-cloth towels using a sound spectrum analysis. International Journal of Clothing Science and Technology.

Zhang, X., & Pan, Z. (2019). Microstructure transitions and dry-wet spinnability of silk fibroin protein from waste silk quilt. Polymers, 11(10), 1622.

Kamarudin, S. F., Mustapha, M., & Kim, J. K. (2021). Green strategies to printed sensors for healthcare applications. Polymer Reviews, 61(1), 116-156.

Rotzler, S., Krshiwoblozki, M. V., & Schneider-Ramelow, M. (2021). Washability of e-textiles: Current testing practices and the need for standardization. Textile Research Journal, 0040517521996727.

Rotzler, S., & Schneider-Ramelow, M. (2021). Washability of E-Textiles: Failure Modes and Influences on Washing Reliability. Textiles, 1(1), 37-54.

Yu, X., & Huang, Z. (2021, July). Quality Evaluation of Measurement Service in Online Clothing Mass Customization Mode. In International Conference on Applied Human Factors and Ergonomics (pp. 292-299). Springer, Cham.

Akgül, E., Kizilkaya Aydo?an, E., & Sinano?lu, C. (2021). Investigation of different denim fabrics with fabric touch tester and sensory evaluation. Journal of Natural Fibers, 1-15.

Maksimovi, N. (2020). Methods to digitizing physical properties of fabric for virtual simulation. Tekstilna industrija, 68(3), 36-43.

Tadesse, M. G., Loghin, C., Dulgheriu, I., & Loghin, E. (2021). Comfort evaluation of wearable functional textiles. Materials 2021, 14, 6466.

Lemesle, J., Robache, F., Le Goic, G., Mansouri, A., Brown, C. A., & Bigerelle, M. (2020). Surface reflectance: An optical method for multiscale curvature characterization of wear on ceramicmetal composites. Materials, 13(5), 1024.

Altangerel, Z., Purev-Ochir, B., Ganzorig, A., Tsagaantsooj, T., Lkhamsuren, G., Choisuren, A., & Chimed, G. (2020). Superhydrophobic modification and characterization of cashmere fiber surfaces by wet coating techniques of silica nanoparticles. Surfaces and Interfaces, 19, 100533.

Smykalo, K., & Zakora, O. Effect of hairiness on fabric colour characteristics Vpliv kosmatosti tkanine na njene barvne zna?ilnosti.

Hardianto, H., Malengier, B., De Mey, G., Van Langenhove, L., & Hertleer, C. (2019). Textile yarn thermocouples for use in fabrics. Journal of Engineered Fibers and Fabrics, 14, 1558925019836092.

Hardianto, H., De Mey, G., Malengier, B., Hertleer, C., & Van Langenhove, L. (2019). Characterization of Carbon-Nickel thermocouples integrated in textile fabrics. In AUTEX2019. Autex.

Hardianto, H., De Mey, G., Ciesielska-Wr?bel, I., Hertleer, C., & Van Langenhove, L. (2018). Seebeck coefficient of thermocouples from nickel-coated carbon fibers: theory and experiment. Materials, 11(6), 922.

Hardianto, H., Mey, G. D., Malengier, B., & Langenhove, L. V. (2020). Textile-based thermoelectric generator fabricated from carbon fibers. Journal of Industrial Textiles, 1528083720910686.

Javadi Toghchi, M., Loghin, C., Cristian, I., Campagne, C., Bruniaux, P., Cayla, A., ... & Chen, Y. (2020). The effects of the structural parameters of three-dimensional warp interlock woven fabrics with silver-based hybrid yarns on electromagnetic shielding behavior. Textile Research Journal, 90(11-12), 1354-1371.

Singh, N., & Sahu, O. (2019). Sustainable cyclodextrin in textile applications. In The Impact and Prospects of Green Chemistry for Textile Technology (pp. 83-105). Woodhead Publishing.

Jalil, M. H., & Shaharuddin, S. S. (2019). Adopting C2CAD Model To Eco Capsule Wardrobe Design. International Journal of Scientific & Technology Research, 8(12), 1224-1233.

Munir, S. (2020). Eco-fashion adoption in the UAE: understanding consumer barriers and motivational factors. Fashion Practice, 12(3), 371-393.

Rathinamoorthy, R. (2021). Slow FashionMindset and Acceptability Among Indian College Students of Tamil Nadu. In Sustainable Textile and Fashion Value Chains (pp. 297-323). Springer, Cham.

Saeed, A., Iqbal, K., Maqsood, H. S., & Basit, A. (2021). Thermal and Comfort Properties of Polyester/micro-polyester and Cotton/regenerated Fibers Blended Knitted Fabrics. Journal of Natural Fibers, 1-11.

Siddique, A., Hassan, T., Abid, S., Ashraf, M., Hussain, A., Shafiq, F., ... & Kim, I. S. (2021). The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure. Coatings, 11(5), 575.

Gorea, A., Baytar, F., & Sanders, E. (2020). Effect of stitch patterns on moisture responsiveness of seamless knitted wool fabrics for activewear. International Journal of Clothing Science and Technology.

Fang, S., Wang, R., Ni, H., Liu, H., & Liu, L. (2020). A review of flexible electric heating element and electric heating garments. Journal of Industrial Textiles, 1528083720968278.

Lemmi, T. S., Barburski, M., & Samuel, B. T. (2021). Analysis of Mechanical Properties of Unidirectional Flax Roving and Sateen Weave Woven Fabric-Reinforced Composites. Autex Research Journal, 21(2), 218-223.

Samuel, B. T., Barburski, M., & Lemmi, T. S. Designing a Three-Dimensional Woven Fabric Structure as an Element of a Baby Stroller. Autex Research Journal.

Kodoman, D. (2019). THE PSYCHOLOGY OF CLOTHING: Meaning of Colors, Body Image and Gender Expression in Fashion. Textile & Leather Review, 2(2), 90-103.

Sullivan, C., Kazlauciunas, A., & Guthrie, J. T. (2020). Colored apparel and its potential influence on heterosexual attraction. Color Research & Application, 45(2), 362-373.

Chowdhury, T. A., & Akter, T. (2018). Fashion attributes preferred by young Bangladeshi consumers while buying casual clothes: A multi-dimensional approach. Journal of Fashion Marketing and Management: An International Journal.

Oblak, L., Glavonji?, B., Bar?i?, A. P., Govedi?, T. B., & Groelj, P. (2020). Preferences of Different Target Groups of Consumers in Case of Furniture Purchase. Wood Industry/Drvna Industrija, 71(1).

Salem, M. Z., Baidoun, S., Walsh, G., & Sweidan, N. (2019). The effect of female portrayal in advertising on the Palestinian females purchase decision. Journal of Islamic Marketing.

Meena, H. C., Shakyawar, D. B., Varshney, R. K., & Kadam, V. (2021). Thermo-physiological Clothing Comfort of Wool-Cotton Khadi Union Fabrics. Journal of Natural Fibers, 1-10.

Kyosev, Y., Kyosev, Y., & Schilgerius. (2019). Topology-based modeling of textile structures and their joint assemblies (pp. 91-147). Switzerland: Springer International Publishing.

Renkens, W., & Kyosev, Y. (2016, July). About the automated pattern creation of 3D jacquard double needle bed warp knitted structures. In IOP Conference Series: Materials Science and Engineering (Vol. 141, No. 1, p. 012010). IOP Publishing.

Li, X., Zhang, A., & Chen, J. Y. (2021). Computerized patterning method of Cliptronic jacquard structures. Textile Research Journal, 00405175211027802.

Kyosev, Y. (2019). Applications of the Topological Generated Models. In Topology-Based Modeling of Textile Structures and Their Joint Assemblies (pp. 221-232). Springer, Cham.

Zhang, Y., Jiang, G., & Zhang, A. (2021). Double-appearance patterning model of warp-knitted spacer textiles based on the jacquard loop index. Textile Research Journal, 00405175211041716.

Vishnu Vardhini, K. J., & Murugan, R. (2017). Effect of laccase and xylanase enzyme treatment on chemical and mechanical properties of banana fiber. Journal of Natural Fibers, 14(2), 217-227.

Vishnu Vardhini, K. J., Murugan, R., & Surjit, R. (2018). Effect of alkali and enzymatic treatments of banana fibre on properties of banana/polypropylene composites. Journal of Industrial Textiles, 47(7), 1849-1864.

Bhat, A. H., Dasan, Y. K., & Khan, I. (2015). Extraction of lignin from biomass for biodiesel production. In Agricultural biomass based potential materials (pp. 155-179). Springer, Cham.

Budtova, T., Aguilera, D. A., Beluns, S., Berglund, L., Chartier, C., Espinosa, E., ... & Buwalda, S. J. (2020). Biorefinery approach for aerogels. Polymers, 12(12), 2779.

Reyed, M. (2019). Reyed., et al.Application of Central Composite Designs Utilized for Scale-up Strategies in the Optimization Process for Development Laccase Production and for the Bioremediation of Various Industrial Pollutants. Acta Scientific Microbiology, 2, 18-27.

Lee, J., Karpova, E., & Lee, M. (2014). Determinants of apparel exports in developed economies: Application of the gravity model and economic geography theory. Clothing and Textiles Research Journal, 32(3), 139-152.

Ifelebuegu, A. O., & Johnson, A. (2017). Nonconventional low-cost cellulose-and keratin-based biopolymeric sorbents for oil/water separation and spill cleanup: A review. Critical Reviews in Environmental Science and Technology, 47(11), 964-1001.

Viju, S., & Thilagavathi, G. (2019). Oil spill cleanup by bonded nettle fibrous mat. Journal of the Institution of Engineers (India): Series E, 100(1), 93-100.

Viju, S., Thilagavathi, G., Vignesh, B., & Brindha, R. (2019). Oil sorption behavior of acetylated nettle fiber. The Journal of the Textile Institute, 110(10), 1415-1423.

Wan Sharifudin, W. S. S. A., Sulaiman, A., Mokhtar, N., Baharuddin, A. S., Tabatabaei, M., Busu, Z., & Subbian, K. (2015). Presence of Residual Oil in Relation to Solid Particle Distribution in Palm Oil Mill Effluent. BioResources, 10(4).

Chattopadhyay, D., & Umrigar, K. (2017). Chemical modification of waste cotton linters for oil spill cleanup application. Journal of The Institution of Engineers (India): Series E, 98(2), 103-120.

Ogbu, I. C., Ibeto, C. N., & Okoye, C. O. B. (2021). Application of raw Vigna subterranean husks as novel sorbent for abstraction of petroleum from contaminated waters. International Journal of Environmental Science and Technology, 1-14.

Jadhav, A. C., & Jadhav, N. C. (2021). Graft copolymerization of methyl methacrylate on Meizotropis Pellita fibres and their applications in oil absorbency. Iranian Polymer Journal, 30(1), 9-24.

Krishnaveni, V. (2018). A study of Chrysanthemum coronarium antibacterial efficacy on cotton for hospital textiles. International Journal of Green Pharmacy (IJGP), 12(03

Sheikh, J., & Gotmare, V. D. (2018). Recycling of Textile Mill (Cellulosic) Waste into Carboxymethyl Cellulose for Textile Printing. In Biopolymers and Biomaterials (pp. 107-116). Apple Academic Press.

Mozafary, V., Payvandy, P., & Rezaeian, M. (2018). A novel approach for simulation of curling behavior of knitted fabric based on mass spring model. The Journal of The Textile Institute, 109(12), 1620-1641.

Goncu Berk, G., & Kahveci, S. (2019). Design of novel running leggings with thermoplastic polyurethane membrane compression zones. Textile Research Journal, 89(8), 1533-1545.

Shahidi, S., Jafari, A., Sharifi, S. D., & Ghoranneviss, M. (2016). Deposition of nano tungsten oxide on glass mat using hot filament chemical vapor deposition for high catalytic activity. High Temperature Materials and Processes, 35(5), 515-521.

Motaghi, Z., & Shahidi, S. (2018). Improvement the conductivity and flame retardant properties of carboxylated single-walled carbon nanotube/cotton fabrics using citric acid and sodium hypophosphite. Journal of Natural Fibers, 15(3), 353-362.

Ibrahim, N. A., Eid, B. M., Aziz, M. S. A., Hamdy, S. M., & Abd Allah, S. E. (2018). Green surface modification and nano-multifunctionalization of denim fabric. Cellulose, 25(10), 6207-6220.

Li, J., Weng, J., Xu, H., Zhou, C., Zhang, D., & Lu, G. (2019). Design of robotic mannequin formed by flexible belt net. Computer-Aided Design, 110, 1-10.

Xu, H., Li, J., Weng, J., Deng, H., Zhou, C., Zhang, D., & Lu, G. (2018, December). The Design of a Deformable Robotic Mannequin. In 2018 IEEE International Conference on Robotics and Biomimetics (ROBIO) (pp. 630-635). IEEE.

Li, J., Zhou, C., Long, J., Xu, H., Zhang, D., & Lu, G. (2021). Computational design of shape-changing robotic mannequin based on 3D human models. Textile Research Journal, 91(9-10), 1065-1082.

Sohaimi, R. M., Ani, A., Ishak, S. A. F. M., & Yahaya, R. (2016). Effect of stitching parameters on ballistic resistance of kevlar fabrics. SCIENCE & TECHNOLOGY RESEARCH INSTITUTE FOR DEFENCE, 53.

Bhatia, D., & Sinha, S. K. (2020). Optimization of Structurally Modified Wool/Polyester Blended Yarns Using Desirability Function. Journal of The Institution of Engineers (India): Series E, 101(2), 115-124.

Bhatia, D., & Sinha, S. K. (2020). Thermo-physiological Properties of Structurally Modified Wool/Polyester Blended Machine and Hand-Spun Yarns as a Weft in Handloom Fabrics. Tekstilec, 63(2), 138-50.

Zhang, Q., & Kan, C. W. (2018). A review of fusible interlinings usage in garment manufacture. Polymers, 10(11), 1230.

Meena, H. C., Shakyawar, D. B., & Varshney, R. K. (2020). Low-stress mechanical properties of wool-cotton blended fabrics. Journal of Natural Fibers, 1-15.

« Prev12 Next »

Citiation Fashion technology textile engineering

Sarkar K, Das D, Chaki TK, Chattopadhyay S (2017) Macro-structured carbon clusters for developing waterproof, breathable conductive cotton fabric. Carbon 116: 1-4

Mahltig B, Zhang J, Wu L, Darko D, Wendt M, et al. (2016) Effect pigments for textile coating: a review of the broad range of advantageous functionalization. Journal of Coatings Technology and Research 14: 35-55

Dabrowska, A. K. (2016). The impact of structural solutions used in clothing protecting against cold on its thermal insulation. International Journal of Clothing Science and Technology.

Fournet, D., & Havenith, G. (2017). Assessment of sport garments using infrared thermography. In Application of Infrared Thermography in Sports Science (pp. 159-183). Springer, Cham.

Teyeme, Y., Malengier, B., Tesfaye, T., & Van Langenhove, L. (2020). A Fabric-Based Textile Stretch Sensor for Optimized Measurement of Strain in Clothing. Sensors, 20(24), 7323.

Abtew, M. A., Boussu, F., Bruniaux, P., Loghin, C., & Cristian, I. (2019). Ballistic impact mechanismsa review on textiles and fibre-reinforced composites impact responses. Composite structures, 223, 110966.

Kuhlmann J C, de Moor H, Driesser M, Bottenberg E, Spee C I M A, & Brinks G J (2018) Development of a universal solar energy harvesting system suited for textile integration including flexible energy storage. J Fash Technol Text Eng.

Kuhlmann J C, de Moor H, Driesser M, Bottenberg E, Spee C I M A, & Brinks G J (2018) Development of a universal solar energy harvesting system suited for textile integration including flexible energy storage. J Fash Technol Text Eng.

GÜRCÜM B, BÖRKLÜ H, SEZER H, & EREN O (2018) Implementing 3D printed structures as the newest textile form. J Fashion Technol Textile Eng S4: 019 2-7.

Bangari, N., Singh, V. K., & Sharma, V. K. (2020). Experimental investigation of thin-film solar cells as a wearable power source. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-21.

Satharasinghe, A., Hughes-Riley, T., & Dias, T. (2020). A Review of Solar Energy Harvesting Electronic Textiles. Sensors, 20(20), 5938.

Fang, S., Wang, R., Ni, H., Liu, H., & Liu, L. (2020). A review of flexible electric heating element and electric heating garments. Journal of Industrial Textiles, 1528083720968278.

Kara, S., Yesilpnar, S., & Arslan, M. (2021). A Survey and Design Study of a Protective Cycling Top Wear. Fibres Text. East. Eur, 28, 31-45.

Anam, W., Akhtar, K. S., Ahmad, F., Rasheed, A., Mohsin, M., Azam, F., ... & Ahmad, S. (2021). Effect of silicone based softener on fabric handle properties made by ring, rotor and MVS yarns. Pigment & Resin Technology.

Al Shaya, S., & Tashkndi, S. (2021). The effect of silver treated fabrics in achieving some clothing comfort characteristics for diabetic female patients, International Design Journal, Vol. 11 No. 2,(March 2021) pp 257-264

Rashid, M. M., Simoni, B., & TomÅ¡i, B. (2020). Recent advances in TiO2-functionalized textile surfaces. Surfaces and Interfaces, 100890.

Mahltig, B., Leisegang, T., Jakubik, M., & Haufe, H. (2021). Hybrid sol-gel materials for realization of radiation protective coatingsa review with emphasis on UV protective materials. Journal of Sol-Gel Science and Technology, 1-12.

Meyer, P., Boblenz, J., Sennewald, C., Vorhof, M., Hühne, C., Cherif, C., & Sinapius, M. (2019). Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications. Aerospace, 6(11), 116.

Vorhof, M., Sennewald, C., Schegner, P., Meyer, P., Hühne, C., Cherif, C., & Sinapius, M. (2021). Thermoplastic Composites for Integrally Woven Pressure Actuated Cellular Structures: Design Approach and Material Investigation. Polymers, 13(18), 3128.

Ankhili, A., Tao, X., Cochrane, C., Koncar, V., Coulon, D., & Tarlet, J. M. (2019). Ambulatory evaluation of ECG signals obtained using washable textile-based electrodes made with chemically modified PEDOT: PSS. Sensors, 19(2), 416.

Ankhili, A., Zaman, S. U., Tao, X., Cochrane, C., Koncar, V., & Coulon, D. (2019). How to Connect Conductive Flexible Textile Tracks to Skin Electrocardiography Electrodes and Protect Them Against Washing. IEEE Sensors Journal, 19(24), 11995-12002.

Maji, S., & Burke, M. J. (2019). Establishing the input impedance requirements of ECG recording amplifiers. IEEE Transactions on Instrumentation and Measurement, 69(3), 825-835.

Goncu-Berk, G., & Tuna, B. G. (2021). The Effect of Sleeve Pattern and Fit on E-Textile Electromyography (EMG) Electrode Performance in Smart Clothing Design. Sensors, 21(16), 5621.

Yun, I., Jeung, J., Lim, H., Kang, J., Lee, S., Park, S., ... & Chung, Y. (2021). Stable Bioelectric Signal Acquisition Using an Enlarged Surface-Area Flexible Skin Electrode. ACS Applied Electronic Materials, 3(4), 1842-1851.

Mert, A. T. E., GÃRARDA, A., & kenan ÃEVEN, E. (2019). Investigation of Seam Performance of Chain Stitch and Lockstitch Used in Denim Trousers. Tekstil ve MÃhendis, 26(115), 263-270.

MEZARCIÖZ, S., O?ULATA, R. T., & Nergis, A. (2020). Investigation of elasticity and growth properties of denim fabrics woven with core and siro spun yarn. Textile and Apparel, 30(4), 312-320.

Liu, Z., He, Q., Zou, F., Ding, Y., & Xu, B. (2019). Apparel ease distribution analysis using three-dimensional motion capture. Textile Research Journal, 89(19-20), 4323-4335.

Jolly, K., Krzywinski, S., Rao, P. V. M., & Gupta, D. (2019). Kinematic modeling of a motorcycle rider for design of functional clothing. International Journal of Clothing Science and Technology.

Vasile, S., Cools, J., De Raeve, A., Malengier, B., & Deruyck, F. (2021). Effect of rowing posture on body measurements and skinsportswear interface pressure and implications on garment fit. Journal of Industrial Textiles, 51(2), 206-224.

Dabolina, I., Lapkovska, E., & Vilumsone, A. (2019). Dynamic Anthropometry for Investigation of Body Movement Comfort in Protective Jacket. In Functional Textiles and Clothing (pp. 241-259). Springer, Singapore.

Abu-Rous, M., Dabolina, I., & Lapkovska, E. (2018, December). Fabric physical properties and clothing comfort. In IOP Conference Series: Materials Science and Engineering (Vol. 459, No. 1, p. 012028). IOP Publishing.

Musa, A. B. H., Malengier, B., Vasile, S., & Van Langenhove, L. (2019). A comprehensive approach for human hand evaluation of split or large set of fabrics. Textile Research Journal, 89(19-20), 4239-4252.

Abu-Rous, M., Dabolina, I., & Lapkovska, E. (2018, December). Fabric physical properties and clothing comfort. In IOP Conference Series: Materials Science and Engineering (Vol. 459, No. 1, p. 012028). IOP Publishing.

Blaisdell, M. G. S., & Yun, C. (2021). The effect of repeated laundering on the softness and smoothness of terry-cloth towels using a sound spectrum analysis. International Journal of Clothing Science and Technology.

Zhang, X., & Pan, Z. (2019). Microstructure transitions and dry-wet spinnability of silk fibroin protein from waste silk quilt. Polymers, 11(10), 1622.

Kamarudin, S. F., Mustapha, M., & Kim, J. K. (2021). Green strategies to printed sensors for healthcare applications. Polymer Reviews, 61(1), 116-156.

Rotzler, S., Krshiwoblozki, M. V., & Schneider-Ramelow, M. (2021). Washability of e-textiles: Current testing practices and the need for standardization. Textile Research Journal, 0040517521996727.

Rotzler, S., & Schneider-Ramelow, M. (2021). Washability of E-Textiles: Failure Modes and Influences on Washing Reliability. Textiles, 1(1), 37-54.

Yu, X., & Huang, Z. (2021, July). Quality Evaluation of Measurement Service in Online Clothing Mass Customization Mode. In International Conference on Applied Human Factors and Ergonomics (pp. 292-299). Springer, Cham.

Akgül, E., Kizilkaya Aydo?an, E., & Sinano?lu, C. (2021). Investigation of different denim fabrics with fabric touch tester and sensory evaluation. Journal of Natural Fibers, 1-15.

Maksimovi, N. (2020). Methods to digitizing physical properties of fabric for virtual simulation. Tekstilna industrija, 68(3), 36-43.

Tadesse, M. G., Loghin, C., Dulgheriu, I., & Loghin, E. (2021). Comfort evaluation of wearable functional textiles. Materials 2021, 14, 6466.

Lemesle, J., Robache, F., Le Goic, G., Mansouri, A., Brown, C. A., & Bigerelle, M. (2020). Surface reflectance: An optical method for multiscale curvature characterization of wear on ceramicmetal composites. Materials, 13(5), 1024.

Altangerel, Z., Purev-Ochir, B., Ganzorig, A., Tsagaantsooj, T., Lkhamsuren, G., Choisuren, A., & Chimed, G. (2020). Superhydrophobic modification and characterization of cashmere fiber surfaces by wet coating techniques of silica nanoparticles. Surfaces and Interfaces, 19, 100533.

Smykalo, K., & Zakora, O. Effect of hairiness on fabric colour characteristics Vpliv kosmatosti tkanine na njene barvne zna?ilnosti.

Hardianto, H., Malengier, B., De Mey, G., Van Langenhove, L., & Hertleer, C. (2019). Textile yarn thermocouples for use in fabrics. Journal of Engineered Fibers and Fabrics, 14, 1558925019836092.

Hardianto, H., De Mey, G., Malengier, B., Hertleer, C., & Van Langenhove, L. (2019). Characterization of Carbon-Nickel thermocouples integrated in textile fabrics. In AUTEX2019. Autex.

Hardianto, H., De Mey, G., Ciesielska-Wr?bel, I., Hertleer, C., & Van Langenhove, L. (2018). Seebeck coefficient of thermocouples from nickel-coated carbon fibers: theory and experiment. Materials, 11(6), 922.

Hardianto, H., Mey, G. D., Malengier, B., & Langenhove, L. V. (2020). Textile-based thermoelectric generator fabricated from carbon fibers. Journal of Industrial Textiles, 1528083720910686.

Singh, N., & Sahu, O. (2019). Sustainable cyclodextrin in textile applications. In The Impact and Prospects of Green Chemistry for Textile Technology (pp. 83-105). Woodhead Publishing.

Jalil, M. H., & Shaharuddin, S. S. (2019). Adopting C2CAD Model To Eco Capsule Wardrobe Design. International Journal of Scientific & Technology Research, 8(12), 1224-1233.

Munir, S. (2020). Eco-fashion adoption in the UAE: understanding consumer barriers and motivational factors. Fashion Practice, 12(3), 371-393.

Rathinamoorthy, R. (2021). Slow FashionMindset and Acceptability Among Indian College Students of Tamil Nadu. In Sustainable Textile and Fashion Value Chains (pp. 297-323). Springer, Cham.

Saeed, A., Iqbal, K., Maqsood, H. S., & Basit, A. (2021). Thermal and Comfort Properties of Polyester/micro-polyester and Cotton/regenerated Fibers Blended Knitted Fabrics. Journal of Natural Fibers, 1-11.

Siddique, A., Hassan, T., Abid, S., Ashraf, M., Hussain, A., Shafiq, F., ... & Kim, I. S. (2021). The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure. Coatings, 11(5), 575.

Gorea, A., Baytar, F., & Sanders, E. (2020). Effect of stitch patterns on moisture responsiveness of seamless knitted wool fabrics for activewear. International Journal of Clothing Science and Technology.

Fang, S., Wang, R., Ni, H., Liu, H., & Liu, L. (2020). A review of flexible electric heating element and electric heating garments. Journal of Industrial Textiles, 1528083720968278.

Lemmi, T. S., Barburski, M., & Samuel, B. T. (2021). Analysis of Mechanical Properties of Unidirectional Flax Roving and Sateen Weave Woven Fabric-Reinforced Composites. Autex Research Journal, 21(2), 218-223.

Samuel, B. T., Barburski, M., & Lemmi, T. S. Designing a Three-Dimensional Woven Fabric Structure as an Element of a Baby Stroller. Autex Research Journal.

Kodoman, D. (2019). THE PSYCHOLOGY OF CLOTHING: Meaning of Colors, Body Image and Gender Expression in Fashion. Textile & Leather Review, 2(2), 90-103.

Sullivan, C., Kazlauciunas, A., & Guthrie, J. T. (2020). Colored apparel and its potential influence on heterosexual attraction. Color Research & Application, 45(2), 362-373.

Chowdhury, T. A., & Akter, T. (2018). Fashion attributes preferred by young Bangladeshi consumers while buying casual clothes: A multi-dimensional approach. Journal of Fashion Marketing and Management: An International Journal.

Oblak, L., Glavonji?, B., Bar?i?, A. P., Govedi?, T. B., & Groelj, P. (2020). Preferences of Different Target Groups of Consumers in Case of Furniture Purchase. Wood Industry/Drvna Industrija, 71(1).

Salem, M. Z., Baidoun, S., Walsh, G., & Sweidan, N. (2019). The effect of female portrayal in advertising on the Palestinian females purchase decision. Journal of Islamic Marketing.

Meena, H. C., Shakyawar, D. B., Varshney, R. K., & Kadam, V. (2021). Thermo-physiological Clothing Comfort of Wool-Cotton Khadi Union Fabrics. Journal of Natural Fibers, 1-10.

Kyosev, Y., Kyosev, Y., & Schilgerius. (2019). Topology-based modeling of textile structures and their joint assemblies (pp. 91-147). Switzerland: Springer International Publishing.

Renkens, W., & Kyosev, Y. (2016, July). About the automated pattern creation of 3D jacquard double needle bed warp knitted structures. In IOP Conference Series: Materials Science and Engineering (Vol. 141, No. 1, p. 012010). IOP Publishing.

Li, X., Zhang, A., & Chen, J. Y. (2021). Computerized patterning method of Cliptronic jacquard structures. Textile Research Journal, 00405175211027802.

Kyosev, Y. (2019). Applications of the Topological Generated Models. In Topology-Based Modeling of Textile Structures and Their Joint Assemblies (pp. 221-232). Springer, Cham.

Zhang, Y., Jiang, G., & Zhang, A. (2021). Double-appearance patterning model of warp-knitted spacer textiles based on the jacquard loop index. Textile Research Journal, 00405175211041716.

Vishnu Vardhini, K. J., & Murugan, R. (2017). Effect of laccase and xylanase enzyme treatment on chemical and mechanical properties of banana fiber. Journal of Natural Fibers, 14(2), 217-227.

Vishnu Vardhini, K. J., Murugan, R., & Surjit, R. (2018). Effect of alkali and enzymatic treatments of banana fibre on properties of banana/polypropylene composites. Journal of Industrial Textiles, 47(7), 1849-1864.

Bhat, A. H., Dasan, Y. K., & Khan, I. (2015). Extraction of lignin from biomass for biodiesel production. In Agricultural biomass based potential materials (pp. 155-179). Springer, Cham.

Budtova, T., Aguilera, D. A., Beluns, S., Berglund, L., Chartier, C., Espinosa, E., ... & Buwalda, S. J. (2020). Biorefinery approach for aerogels. Polymers, 12(12), 2779.

Reyed, M. (2019). Reyed., et al.Application of Central Composite Designs Utilized for Scale-up Strategies in the Optimization Process for Development Laccase Production and for the Bioremediation of Various Industrial Pollutants. Acta Scientific Microbiology, 2, 18-27.

Lee, J., Karpova, E., & Lee, M. (2014). Determinants of apparel exports in developed economies: Application of the gravity model and economic geography theory. Clothing and Textiles Research Journal, 32(3), 139-152.

Ifelebuegu, A. O., & Johnson, A. (2017). Nonconventional low-cost cellulose-and keratin-based biopolymeric sorbents for oil/water separation and spill cleanup: A review. Critical Reviews in Environmental Science and Technology, 47(11), 964-1001.

Viju, S., & Thilagavathi, G. (2019). Oil spill cleanup by bonded nettle fibrous mat. Journal of the Institution of Engineers (India): Series E, 100(1), 93-100.

Viju, S., Thilagavathi, G., Vignesh, B., & Brindha, R. (2019). Oil sorption behavior of acetylated nettle fiber. The Journal of the Textile Institute, 110(10), 1415-1423.

Abtew, M. A., Boussu, F., Bruniaux, P., Loghin, C., & Cristian, I. (2019). Ballistic impact mechanismsa review on textiles and fibre-reinforced composites impact responses. Composite structures, 223, 110966.

Mahltig, B., Leisegang, T., Jakubik, M., & Haufe, H. (2021). Hybrid sol-gel materials for realization of radiation protective coatingsa review with emphasis on UV protective materials. Journal of Sol-Gel Science and Technology, 1-12.

Vasile, S., Cools, J., De Raeve, A., Malengier, B., & Deruyck, F. (2021). Effect of rowing posture on body measurements and skinsportswear interface pressure and implications on garment fit. Journal of Industrial Textiles, 51(2), 206-224.

Lemesle, J., Robache, F., Le Goic, G., Mansouri, A., Brown, C. A., & Bigerelle, M. (2020). Surface reflectance: An optical method for multiscale curvature characterization of wear on ceramicmetal composites. Materials, 13(5), 1024.

Rathinamoorthy, R. (2021). Slow FashionMindset and Acceptability Among Indian College Students of Tamil Nadu. In Sustainable Textile and Fashion Value Chains (pp. 297-323). Springer, Cham.

Kodoman, D. (2019). THE PSYCHOLOGY OF CLOTHING: Meaning of Colors, Body Image and Gender Expression in Fashion. Textile & Leather Review, 2(2), 90-103.

Oblak, L., Glavonji?, B., Bar?i?, A. P., Govedi?, T. B., & Groelj, P. (2020). Preferences of Different Target Groups of Consumers in Case of Furniture Purchase. Wood Industry/Drvna Industrija, 71(1).

Reyed, M. (2019). Reyed., et al.Application of Central Composite Designs Utilized for Scale-up Strategies in the Optimization Process for Development Laccase Production and for the Bioremediation of Various Industrial Pollutants. Acta Scientific Microbiology, 2, 18-27.